Read on Twitter
{HOW TO MAKE YOUR ERIBONG CHANGE COLOR WITHOUT WY/TH OF VLIV*E+ :>> || A THREAD}I don't I've seen anyone tried it so might be the first one to do so hehe
#EXO #ERIBONG_DIY #EXOL @weareoneEXO @layzhang @B_hundred_Hyun
WHAT YOU'LL BE NEEDING:
• COLORED PAPER OR CELLOPHANE (idk what it's called in other place)
• SCISSORS
• PENCIL
• ERIBONG V3 (I'm sorry if it only allowed in EV3 and not for other versions :<)
• Cutter or Metal Ruler (to open the eribong)
• (optional) TAPE
• CREATIVITY
• COLORED PAPER OR CELLOPHANE (idk what it's called in other place)
• SCISSORS
• PENCIL
• ERIBONG V3 (I'm sorry if it only allowed in EV3 and not for other versions :<)
• Cutter or Metal Ruler (to open the eribong)
• (optional) TAPE
• CREATIVITY
NEXT STEP: WITH THE USE OF A CUTTER OR A METAL RULER (what ever you prefer) CAREFULLY OPEN UP THE GLASSTIC PART OF YOUR ERIBONG
NOTE: IF YOU CAN HANDLE SHARP THINGS THAT WELL YOU CAN CALL ON A FRIEND OR PARENT TO HELP YOU OUT IN THIS :))
NOTE: IF YOU CAN HANDLE SHARP THINGS THAT WELL YOU CAN CALL ON A FRIEND OR PARENT TO HELP YOU OUT IN THIS :))
NEXT STEP: KINDLY OUTLINE THE LIGHT PART OF YOUR ERIBONG AND CUT IT PRECISELY XD AND THE CUT OUT SHOULD LOOK LIKE THIS
(3RD PIC)
(3RD PIC)
NEXT STEP: ONCE YOU'RE DONE, PLACE THE CUT OUT IN THE ERIBONG, SO THAT IT CAN COVERR ALL THE LIGHTS (MAKE SURE IT'S IN THE CENTER SIS). THEN KINDLY PUT BACK THE ERIBONG BACK PIECE BY PIECE :))
PUT BACK THE GLASS PART OF THE ERIBONG THEN LIGHT IT ALL UP THEN YOU'RE DONEEEE
BONUS: AFTER CREATING ALL OF THAT YOU CAN NOW MIX AND MATCH UP DIFFERENT COLORS OF COLORED PAPER AND CELLOPHANE TO YOUR LIKING :>>
ANOTHER BONUS SEGMENT FOR THE PH FLAG FOR PHIXOS HIHI
(THIS WAS MY FIRST EVER DRAFT TO MY IDEA SO THE CUT OUT FOR THE PH FLAG IS SOMEWHAT SKETCHY BUT YOU CAN GET THE IDEA OF IT
)
(THIS WAS MY FIRST EVER DRAFT TO MY IDEA SO THE CUT OUT FOR THE PH FLAG IS SOMEWHAT SKETCHY BUT YOU CAN GET THE IDEA OF IT
)
SINCE IS USED UP ALL MY CELLOPHANE. I'LL TRY TO RECREATE IT IN COLORED PAPER BUT IN A DIFFERENT COLOR :V
AFTER MAKING THE CUTOUT (THE HEXAGON SHAPE) FOLD IT IN HALF LIKE THIS (2ND PIC)
THIS ALSO APPLIES TO THE BOTTOM HALF OF THE FLAG.
(2ND PIC)THIS ALSO APPLIES TO THE BOTTOM HALF OF THE FLAG.
FOR THE YELLOW PART(REPRESENTED VIOLET) KINDLY FOLD THE 2 SIDES AND CUT IT OUT SO YOU WILL BE LEFT WITH A PENTAGON LIKE SHAPE
AFTER TAPING IT ALL TOGETHER TO CREATE ONE PIECE. THEN PUT IT INSIDE THE ERIBONG. PUT IT BACK TOGETHER AND OPEN THE LIGHTS UP. YOU'LL NOW HAVE YOYR VERY OWN PH FLAG~
AND THAT'S HOW YOU CREATE YOUR VERY OWN COLORFUL ERIBONG :>>> HOPE THIS HELPED YOU OUT GUYSS HAPPY CRAFTING~ HEHE
DISCLAIMER: OPEN THE ERIBONG AT YOUR OWN RISK :> IF YOU'RE BRAVE ENOUGH TO OPEN IT UP YOU CAN :)) IF YOU'RE FAINT HEARTED FOR THIS KIND OF PROJECT I SUGGEST THAT YOU SHOULDN'T DO IT :<<
I was kinda scared at first to try it. almost freaked out, but you kinda get used to it
I was kinda scared at first to try it. almost freaked out, but you kinda get used to it
