If you have a 3D printer & live in the Oxford area (UK) let me know. I am making face-shields for medics testing people for COVID-19. I now have more demand than I can produce. I need help to print more headbands. I can assemble the rest, sterilise them & arrange distribution.
Extra info:
1. I& #39;m working on admin support to help respond to the many wonderful people offering assistance and suggestions. So I will be slow to respond in my usual working hours. If I don& #39;t reply, it& #39;s not a lack of overwhelming gratitude.
1. I& #39;m working on admin support to help respond to the many wonderful people offering assistance and suggestions. So I will be slow to respond in my usual working hours. If I don& #39;t reply, it& #39;s not a lack of overwhelming gratitude.
Extra info:
2. I& #39;m printing in PLA, as I& #39;m waiting for an order of a better material - PETG. PLA must not be cleaned with heat, hot water or steam - it will distort.
2. I& #39;m printing in PLA, as I& #39;m waiting for an order of a better material - PETG. PLA must not be cleaned with heat, hot water or steam - it will distort.
Extra info:
3. This is the design I& #39;m using. I& #39;ve chosen it because the clear face-visors can be made from thick A4 document covers, hole-punched with a standard punch on the A6 setting. Round corners with scissors. I& #39;m using the file rc2_3-hex-holes.stl https://www.prusaprinters.org/prints/26241-face-shield-a4-binding-sheet-easy-punching/files">https://www.prusaprinters.org/prints/26...
3. This is the design I& #39;m using. I& #39;ve chosen it because the clear face-visors can be made from thick A4 document covers, hole-punched with a standard punch on the A6 setting. Round corners with scissors. I& #39;m using the file rc2_3-hex-holes.stl https://www.prusaprinters.org/prints/26241-face-shield-a4-binding-sheet-easy-punching/files">https://www.prusaprinters.org/prints/26...
Extra info:
4. If you are not in Oxford area, then I highly recommend joining another collective of 3D-printers. See for example: https://www.3dcrowd.uk"> https://www.3dcrowd.uk
4. If you are not in Oxford area, then I highly recommend joining another collective of 3D-printers. See for example: https://www.3dcrowd.uk"> https://www.3dcrowd.uk