Thread by @repkord, Ok 3D Printers, if ever there was a moment for us its [...]

Ok 3D Printers, if ever there was a moment for us its now. I received no less than 50 texts last night directly from local ER docs BEGGING for as many shields as we can get them. My little printfarm is not nearly enough. WE NEED YOU! So... 1/4

Go here... https://www.prusaprinters.org/prints/25857-protective-face-shield-rc1">https://www.prusaprinters.org/prints/25... Download the latest files. Start printing RC2 VERSION in PETG EXACTLY AS SPECCED. And pack it up safely to be sent to our team. We are setting up the proper process to disinfect everything we receive but PLEASE be mindful of your health... 2/4

Prusa Face Shield : PrusaPrinters

A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. Check this print for stacked versions (1h 20min...

https://www.prusaprinters.org/prints/25857-protective-face-shield-rc1

Act as if you& #39;re infected, place everything in a bag straight away... Read the blog here: #_ga=2.191177450.1146287399.1584659215-1222899178.1579834547">https://blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days/ #_ga=2.191177450.1146287399.1584659215-1222899178.1579834547

I">https://blog.prusaprinters.org/from-desi... will post the address ONCE I HAVE A RECEIVING SYSTEM IN PLACE.... PLEASE START PRINTING NOW! RT share EVERYWHERE, help spread the word 3/4...

UPDATED 30.3. - From Design to Mass 3D printing of Medical Shields in Three Days - Prusa Printers

30.3. Groups and headband cover We’ve released GROUPS on PrusaPrinters. You can share information, collaborate and help others with (not only) the production of protective shields. You can learn...

https://blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days/#_ga=2.191177450.1146287399.1584659215-1222899178.1579834547

The need is beyond anything you can imagine, if you don& #39;t believe me just talk to any front line care provider you know... this is meaningful work that will potentially save lives. PLEASE HELP. CC: @MasksForDocs

Receiving Address:

Repkord @ Hackerlab
4415 GRANITE DR STE 200
OFFICE 211
ROCKLIN, CA 95677-2163
United States

We need RC2 of BOTH band pieces in the model here preferably in PETG (best for disinfecting) But will take any LABELED material https://www.prusaprinters.org/prints/25857-protective-face-shield-rc1/files

https://www.prusaprinters.org/prints/25... href="https://twitter.com/MasksForDocs">@MasksForDocs

Prusa Protective Face Shield - RC3 : PrusaPrinters

A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. Check this print for stacked versions (1h 20min...

https://www.prusaprinters.org/prints/25857-protective-face-shield-rc1/files

Latest Threads Unrolled: